起重吊装作业流程及注意事项(国外英文资料).docVIP

起重吊装作业流程及注意事项(国外英文资料) The hoisting work shall be carried out in accordance with the operation procedures. In order to avoid any safety accidents, the lifting notice shall be noted and strictly observed by the lifting company. 1, all personnel involved in the construction, must be familiar with lifting methods and engineering content, according to the requirements of the project construction, and strictly implement the rules and regulations. 2, in the construction process, the construction staff must be specific division of labor, clear responsibilities. In the whole lifting process, we must conscientiously observe the order of the field, obey orders, listen to the conductor, and shall not leave the work station without authorization. 3, there should be a unified command signal during the hoisting process, all personnel involved in the construction must be familiar with this signal in order to coordinate the movements of the operation positions. 4. When hoisting, the whole scene is deployed by the commander in chief, and each post shall be in command. The command of the Chief Executive shall be properly carried out, and the signals shall be transmitted quickly and accurately, and shall be responsible for the scope of their duties. 5, in the entire construction process, to do on-site cleaning, removal of obstacles, in order to facilitate operation. 6, the construction personnel who participate in climbing operations, must pass the physical examination qualified, operating with safety belts, and tied in a safe position. Tools should be secured and shall not be thrown at will. 7, construction personnel must wear a safety helmet, such as winter construction, should be put down protective ears, so that the hearing is unimpeded. 8, live welding wire and wire to stay away from the wire rope, live line distance should be maintained at more than 2 meters, or with protective rack, welding wire and wire rope crossing should be separated from, strictly prohibit contact. 9, the