核主泵用流体动压密封环复杂形面超精密磨削.pdfVIP

48  13       Vol.48 No.13 2 0 1 2  7  JOURNAL OF MECHANICAL ENGINEERING Jul. 2 0 1 2 DOI 10.3901/JME.2012.13.184    *        (    116024)    !#$%()* +,-./0123452675289:;=?@A BCDEFG2HIJ *JK/LMN@/OPQRS TU V/WXYZ[ =?@L\]BCHIJ D^_`a=?@bc[ deOfBC]g@8g@hij klmnopAq rfstuvwxyfz^{l|\A}~Of€‚Ofƒ„…/ [ V/WXYZ[ Of†‡mn !/eOf2ˆ‰Š‹fl    ! ŒO  Ž  TG580 Ultra-precision Grinding of the Complex Surfaces of Hydrodynamic Seal Rings Used in Reactor Coolant Pumps HUO Fengwei GUO Dongming FENG Guang KANG Renke WANG Ruili (Key Laboratory for Precision and Non-Traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian 116024) Abstract A novel method for ultra-precision grinding the complex surfaces of the hydrodynamic seal rings used in reactor coolant pumps is proposed. It uses a rotary table and a cup wheel to perform an infeed grindingo. Its principle is that the grinding contact arc is an approximation to the curve on the wavy surface bounded by its inner and outer peripheries if select suitable wheel radius, wheel pitch angle, wheel roll angle and the center distance between the wheel and the rotary table and the trajectory of the grinding contact arc can form the wavy surface by numerically controlling the rotation of the rotary table and the synchronous periodic motion of the rotary table or the cup wheel, and the flat dam surface can be generated if the two rotational axes are parallel. Micro infeed grinding with constant wheel depth of cut is adopt so that t