提高带钢热连轧卷取温度控制质量的措施.pdfVIP

系统与装置 提高带钢热连轧卷取温度控制质量的措施 裴红平 ,王 　京 (北京科技大学 高效轧制国家工程研究中心 ,北京 100083) [摘 　要] 以莱芜钢铁公司 1 500 mm 热连轧机层流冷却系统为对象 ,对如何提高带钢卷取温度控制质量进行了 研究。在基于非线性函数分段线性化的预设定模型的基础上 ,加入了如下措施来改善控制质量 :考虑模型中所 用变量的波动 ,对预设定模型进行实时动态补偿 ;考虑模型中没有涉及到的因素及慢时变参数对卷取温度的影 响 ,对带钢头部进行自学习。运行结果证明所采用的这些措施大大提高了控温精度 ,能够很好地满足产品质量 的要求。 [ 关键词]层流冷却 ;卷取温度 ;动态修正 ;滤波处理 ( ) [ 中图分类号] TG3349 　[文献标识码]A 　[文章编号] 2006 Measures of improving coiling temperature control quality in hot continuous strip steel rolling PEI Hongping ,WANGJing (National Engineering Research Center of Advanced Rolling Technology , University of Science and Technology Beijing , Beijing 100083 , China) Abstract :Taking the laminar cooling system of 1 500 mm hot strip rolling mill in Laiwu Iron and Steel Co as an object ,how to improve strip temperature control quality is studied. Based on presetting model , several measures to improve control precision were adopted. Firstly ,considering fluctuation of variables used in the model ,realtime dynamic compensation was implemented for the presetting model. Secondly ,considering in fluence of some parameters not involved in the model and slow timevarying parameters on coiling tempera ture ,strip head selflearning was carried out. Operation results prove that the used measures have improved coil temperature control accuracy greatly ,and the system can satisfy the requirement of product quality. Key words :laminar cooling ; coiling temperature ; dynamic correcting ; filtering 　　莱芜钢铁公司 1 500 mm 带钢热连轧机生产线 却系统的设备简图如图 1 所示。 是由国内自己设计、安装和调试的宽带钢热连轧 生产线。北京科技大学高效轧制国家工程研究中 心为该项目的三电技术总负责方。系统已于 2005 年 6