大型企业网站建设方案.doc.doc

大型企业网站建设方案 ￥　 元/个 ￥ 元 原创Flash首页 个 　年 ￥　 元/个 ￥ 元 标准内页 套 　年 ￥　　 元/套 ￥ 元 产品展示系统 个 　年 ￥　 元/个 ￥ 元 新闻管理系统 个 　年 ￥　　 元/个 ￥ 元 内容发布系统 个 　年 ￥　　 元/个 ￥ 元 留言中心 　　 元/个 ￥ 元 会员注册系统 元/个/标准版 ￥ 元 其它定制系统 ￥ 元 企业邮局 M 　年 ￥　 元/个*年 ￥ 元 虚拟空间 M 　年 　 M，共 元 ￥ 元 英文域名 .com ： 元/个*年 　 .cn： 元/个*年 ￥ 元 中文域名 .cn(中国) ： 元/年 ￥ 元 网站维护费 次年起收取，负责网站日常维护，如有重大修改，双方可就费用方面另行协商。 特殊要求： 费用合计：（人民币） 拾 万 仟 佰 拾 元整　 成功案例： / / / / / / / / / / / / / / / the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not exceed four at a time, when th