螺丝、垫圈、螺母、词汇.docVIP

1. 铜件螺丝 2.组合件螺丝 3.家具螺丝 4.内六角圆柱头不锈钢螺丝5.紧定螺丝 6.拉钉 7.精密螺丝 8.平头一字螺丝 9.梅花头螺丝 10.十字外六角螺丝 11.平头方颈螺丝 12.十字外六角带介螺丝 13.平头十字螺丝 14.大扁头螺丝 15.带介螺丝 16.平圆十字螺丝 17.平头内六角螺丝 18人字型螺丝 19 一字型螺丝 20梅花安全型螺丝 21.三角型螺丝 22. 工字型螺丝 23.收尾螺丝 24.自攻螺丝 25.耐烙螺丝 26.三角牙螺丝 27.介子 Description in Chinese 英文品名 Desciption in English 圆锥销 Taper pins 圆柱销 Parallel pins 开槽圆柱头螺钉 Slotted cheese head screws 开槽盘头螺钉 Slotted pan head screws 单耳止动垫圈 Tab washers 开口销 Split cooter pins 开槽半沉头木螺钉 Slotted raised csk head wood screws 开槽半圆头木螺钉 Slotted round head wood screws 开槽沉头木螺钉 Slotted countersunk head wood screws 平垫 Plain washers 平垫（带倒角） Mediun washers 平垫 Plain washers 重型弹垫 Spring lock washers,tang ends 标准弹垫 Spring lock washers,square ends 鞍形弹垫 Single coil spring lock washers 弹簧止动垫圈 Curved spring washers 波形弹垫 Wave spring washers T型方颈螺栓 T-head blots with square neck T型双接头螺栓 T-head bolts with double nip 螺纹圆锥销 Taper pins with threaded end T型头螺栓 T-head bolts 蝶型螺母（美制） Wing nuts America form 蝶型螺母（德制） Wing nuts germany form 蝶型螺母（美制） Wing screws America form 蝶型螺母（德制） Wing screws germany form 圆球型盖型螺母 Ball knobs 开槽带孔球面 圆柱头蚴钉 Slotted capstan screws 开槽长圆柱端 紧定螺钉 Slotted set srews with full dog point 开槽平端 紧定螺钉（半牙） Slotted set srews with chamfered end 小六角特薄细牙 螺母 Pip nuts with thread 外舌止动垫圈 External tap 小垫圈 (用于圆柱头螺钉) Washers for cheese head screws 方斜垫圈（U型） Square taper washers for U-section 方斜垫圈（I型） Square taper washers for I-sections 方垫圈 Square washers 开槽凹端紧定螺钉 Slotted set with cup point 六角薄螺母 Hexagon thin nuts 细牙六角薄螺母 Hexagon thin nuts 木螺钉专用垫圈 Rounds washers for wood constructions 密封帽 Sealing caps,push-in type 活节螺栓B型 Eye bolts form B 内舌止动垫圈 Internal tab washers 双耳止动垫圈 Washers with two taps 滚花高头螺钉 Knurled thumb screws with collar 开槽滚花高头螺钉 Slotted knurled thumb screws with collar 滚花高螺母 Knurled thumb nuts with collar 滚花薄螺母 Knurled thumb thin nuts 锁紧垫圈 Sealing washers 轴用弹性垫圈 Retaining rings for shafts(external),circlips 孔用弹性垫圈 Retaining rings for bores(internal),circlips 方头带垫螺栓 Square head bolts with collar 方头圆柱底端螺栓 Square head bolts with ha