安装施工员(电气)考试大纲(国外英文资料).docVIP

安装施工员(电气)考试大纲 Qualification examination of professional and technical management personnel of construction enterprises in Hunan Installation of construction workers (Electrical direction), professional basic knowledge, post knowledge and professional practice subjects examination outline (revised in 2013) Basic knowledge of profession I. strong foundation for installation of strong electricity (1) basic knowledge of electrical engineering; 1. Ohms law and Kirchhoffs law 2. sine AC three elements and valid values 3. the concept of current, voltage, and electrical power 4.RLC circuit and the concept of power factor The basic structure and application of 5. diode and transistor The basic structure and working principle of 6. transformers and three-phase AC asynchronous motors 7., the composition of the circuit and the role of each part Three states and characteristics of 8. circuits (two) basic knowledge of building power supply and distribution 1., the composition of the power system, rated voltage, voltage deviation, neutral grounding and characteristics 2. classification of power load and power supply requirement 3. the primary connection mode and characteristics of the power distribution system (three) common equipment for power supply and distribution systems 1. types, functions, main parameters and selection of commonly used high and low voltage electrical equipment, electrical instruments and meters 2. commonly used high and low voltage distribution equipment selection and construction drawings in the model notes 3. basic motor control and protection (four) wires and cables 1. types, types and specifications of common wires and cables Selection and marking of wires and cables for 2. distribution lines (five) building lightning protection and grounding; 1. types and effects of grounding 2. classification of lightning protection, lightning protection type, requirements and measures 3. the composition, materials and specifications of lightning protection devices (s