ADSL用户设置固定IP地址的有效方法(国外英语).docVIP

ADSL用户设置固定IP地址的有效方法(国外英语资料) The ADSL user sets an effective method for fixing IP addresses First you have to get the IP of your Internet area, and if its 2000 / xp, then start, run, enter CMD, to be sure Then enter ipconfig, which shows that the IP Address is your native IP Address. If its start at 98, and the winipcfg is entered, you can see the local IP. The second step is to consciously change the IP that you get to your fixed IP, for example, if you just had IP 61.2.245, the network automatically matches The mode of IP is from 255 to 0, the first one is 55, the second is 61.2.254, and the third is 53. With this kind of push, the smaller the smaller the smaller (the last one), the better chance you have to make a fixed IP If you choose 29, your IP is 9. The above 61.1.2. * is an example, not the one you want to make, you need to see clearly. The third step is to get the gateway and take the example above to show that your gateway is , which means that the last one becomes 1. The fourth step is to log in to your telecommunications department to get the DNS, and when you find it, youll take the url, turn off your cat, and log in again The website you just wrote down, the machine will show you the IP address of the website in the login information box below, for example , the first two were too big for us, so the DNS you get is and , which is a fixed format You have to remember that 1.4\2.5 is the same. If you cant find a website in person to the telecommunications department in person, look for local government The net, cant, cannot find again, forget to say, is to seek the ground city level administrative net, this is found, turn off the cat, write down the big gong Into. The fifth step is on the machine, you can hit the right chain in the network and find the network card you want to make The machine is a double network card, fill in the information that you just obtained in the corresponding column, want to fill the host name when enabling DNS, you can fill in