ospf-12考题(国外英语).docVIP

ospf-12考题(国外英语资料) judge In the OSPF protocol, there is no ASBR in the NSSA area, but there can be ABR. correct error The two switches directly enable the OSPF, and the attached VLAN three-layer interface Netmask is inconsistent, one is 255.255.0.0, the other is 255.255.255.0, and the status of a neighbor of OSPF is not likely to be full. (a) correct error 3, OSPF filter is one way of LSA, this way is not really the LSA filtering, is just to prevent the generation of LSA, without the LSA, may also affect other corresponding with regional or router with autonomous domain. (a) correct error There are two abrs in the stub area of OSPF, and the default routing that they generate may cause them to point to each other to form a loop. (a) correct error There are two abrs in the stub area of the OSPF, and the default routing that they generate will not allow them to point to each other to form a loop. (a) correct error multi-select 1, a running OSPF routers, its two working interface an area belongs to 0, another belongs to the area of 9, and introduces five static routing, then the router will generate the LSA? (a) A, Router LSA (Type = 1); B, Network LSA (Type = 2); C, Network Summary LSA (Type = 3); D, the ASBR Summary LSA (Type = 4); E, AS External LSA (Type = 5); 2, about the adjacency relation between routers in the OSPF protocol (adjacency), the following are true: () A and two routers, as long as they are bi-directional neighbors (each received A Hello message from each other), will automatically become an adjacency relationship If the two routers are adjacent to each other, the underlying network is likely to be point-to-point If the two routers are adjacent to each other, the underlying network type may be point-to-multipoint D, only two routers are adjacent to each other, and the LSA information is exchanged between them In the 0SPF, the following network types need to select a DR: () A, NBMA B, radio; C, point to point: D, point to point; The following is true fo