ECR 离子源实验台的研制.PDFVIP

CNIC-01920 CAEP-020S ECR 离子源实验台的研制 周长庚胡永宏李彦 (中国工程物理研究院核物理与化学研究所，绵阳，621900) 摘要 介绍了 ECR 离子源实验台的工作原理、基本结构和研制过程o 作为实验和测试平台，ECR 离子源实验台可以很方便的调整离子源 各参数，在靶上得到好的束流品质o 通过对部件的改进和调试，解决 了束流较小的问题，使ECR 离子源工作在最佳状态。上述结果可用 于中子发生器的运行调试。因此，ECR 离子源实验台是强中子发生 器所必需的实验设备o 与国内外的 ECR 离子源相比，ECR 离子源 实验台主要着眼于中子发生器的模拟实验，在结构上强调小型化、实 验平台化，在功能上要求能够在线测量许多重要参数D 测量结果表 明， ECR 离子源实验台技术指标达到设计要求O 关键词:实验台 ECR 离子源 中子发生器 122 Manufacture of an Experimental Platform with ECR Ion Source (In Chinese) ZHOU Changgeng HU Y onghong LI Yan (Institute of Nuclear Physics and Chemistry , CAEP ，孔1ianyang ， 621900) ABSTRACT The working principle and basal configuration and fabricative process of ECR ion source are introdced. Regarding as an experimental and test device , the experimental platform of ECR ion source may expediently regulate every pa- rameter of ion source , and achieve good character of beam current. Through improving on the components , ECR ion source can is modulated in 已est state. Above results may be used in the running and debugging of neutron generator. Therefore ,the experimental platform of ECR ion source is the necessary equip- ment of large beam current neutron generato r. Comparing the experimental platform of ECR ion source with domestic ones and the overseas ones , it mainly be used in the simulation experiments about neutron generato r. It is compact and experinlental platform mode in structure. It can focus the beam current and measure many parameters on line in function