DLP-2232H;中文规格书,Datasheet资料.pdfVIP

DLP- DLP- 2232H 2232H LEAD-FREE DUAL-CHANNEL HIGH-SPEED USB ADAPTER DUAL-CHANNEL HIGH-SPEED USB ADAPTER The DLP-2232H is DLP Design’s premier USB-to-UART/FIFO interface module based on FTDI’s 5th generation USB 2.0 High Speed (480Mb/s) silicon. The DLP-2232H is manufactured in a lead-free, RoHS-compliant, compact 40-pin, 0.1-inch spaced standard 0.6 inch wide DIP footprint. FEATURES: The DLP-2232H is drop in compatible with the DLP-2232M except for the difference in the VCCIO voltage. The DLP-2232H has a maximum VCCIO of +3.6 Volts, but as inputs it’s IO pins are +5.0 Volt tolerant. The DLP-2232H is shipped from the factory in DLP-2232M compatible mode. Refer to section 2.1 for mode select jumper configuration details. The DLP-2232H has the capability of being configured in a variety of industry standard serial or parallel interfaces supporting these features: • Entire USB protocol handled on the module. No USB specific firmware programming required. • USB 2.0 High Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible. • Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design. • RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter). • USB to parallel FIFO transfer data rate up