大纲1(国外英文资料).docVIP

大纲1 Test syllabus for Highway Test Surveyors Chapter 1 subject 1 material test I. soil test (two) main examination scope; The main tests include three phases of soil physical index conversion, soil particle partition and engineering classification, relative density and limit water content, soil dynamic characteristics and compaction test, soil compressibility index and strength index and in situ geotechnical testing method and relevant test basic operation rules. (three) main examination content; 1., soil three-phase composition, transitivity index conversion Control: water content test; density test; specific gravity test. 2.. Classification and classification of soil samples Particle analysis test. 3. relative density and limit moisture content Master: Test of relative compactness of sand; limit moisture content test. 4. dynamic characteristics and compaction test of soil Grasp: compaction test. 5. compressibility index and strength index of soil Mastery: consolidation test; direct shear test; unconfined compression test; load ratio (CBR) test; resilient modulus test; 7. sampling and preparation of soil samples Master: soil samples and specimen preparation. 8. test data processing Master: sampling inspection, evaluation method and its practical application in engineering. (four) main bibliography 1. highway geotechnical test procedures (JTJ 051 - 93). Beijing: China Communications Press, 1993 2. highway engineering test and test technology training materials - subgrade and pavement test and inspection technology. Beijing: China Communications Press, 2004.11 3. soil science and soil mechanics (Third Edition). Beijing: China Communications Press, 2001.5 Two. Building materials and their mixtures (1) examination purposes and requirements This subject requires candidates to systematically understand and grasp the road test for building materials test the basic theoretical knowledge and experimental skills, including gravel materials, cement and cement concrete, asphal