液体粘度对气液固三相循环流化床颗粒循环速度和流型特征速.PDFVIP

20 6 No.6 Vol.20 2006 12 Journal of Chemical Engineering of Chinese Universities Dec. 2006 1003-9015(2006)06-1005-04 , , , , ( , 300072) (d = 0.48 mm, ρ = 2460 kg⋅m−3) (d = 1.45mm, ρ = 1264 kg⋅m−3) p s p s 0.05%0.20% (mass) CMCS () -- O359 TQ051.13 A Effects of Liquid Viscosity on Particle Circulating Velocity and Flow Regime Characteristic Velocities in Gas-Liquid-Solid Three -Phase Circulating Fluidized Beds CAO Chang-qing, LIU Ming-yan, WANG Yi-ping, QIN Xiu-yun, HU Zong-ding (School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China) Abstract: The effects of liquid viscosity, superficial liquid velocity, superficial gas velocity, secondary liquid velocity and particle density on the particle circulating velocity in a three phase circulating fluidized bed were studied. In the experiments, under a wide range of operation conditions, the glass beads (d =0.48 mm, ρ =2460 p s kg⋅m−3) and styrene resin (d =1.45 mm, ρ =1264 kg⋅m−3) were used respectively as solid phases, the water, p s 0.05%(mass) and 0.2%(mass) carboxymethyl cellulose sodium (CMCS) were used respectively as liquid phase and the air was used as gas phase. Experimental results show that the particle circulating velocities increase with increasing liquid velocity, superficial liquid velocity and secondary liquid velocity. However, the particle circulating velocities decrease with increasing supe