基于塑性应变场单曲率面板材激光热成形工艺研究.pdfVIP

1 1 2 石永军 刘衍聪 胡 俊 1. 中国石油大学( 华东) , 东营, 257061 2. 上海交通大学, 上海, 200240 : 为了实现单曲率面板材的 精度激光热成形, 提出一种基于塑性应变场进行工艺规划的方 法该方法首先通过有限元分析获得单曲率型面板材弯曲变形所需要的塑性应变场, 基于塑性应变场 进行路径规划, 利用工艺参数与残余塑性弯曲应变基本关系数据库确定激光加工工艺参数为了快速 评价工艺规划的合理性, 提出基于等价载荷模型的有限元仿真方法实验结果表明, 利用该加工策略加 工的激光热成形面与目标曲面形状基本一致 : ; ; ; : T N249 : 1004 132X( 2011) 12 1493 05 Study on Processing Strategy of Singly Curved Surface Based on Plastic Strain Field in Laser Forming 1 1 2 Shi Yon jun Liu Yancon Hu Jun 1. China Univer sity of Petroleum , Don yin , Shandon , 257061 2. Shan hai Jiao T on U niver sity, Shan hai, 200240 Abstract: To obtain hi h accurate shape w ith sin ly curved in laser formin , a new desi n appr oach w as proposed based on plastic strain field. Fir stly, a plastic strain field required to obtain a desired shape w as obtained by finite element analysis. T he heatin paths w ere planned usin the above plastic strain field. T he process parameters w er e determined accordin to the basic relationship database betw een the process parameters and the r esidual plastic str ain. In or der to quickly evaluate the validity of the process str ate y, a method of finite element simulation based on an equivalent load model w as iven. The experimental r esults based on the above process strate y show that the laser formin shape is approximately consistent w ith the desirable shape. Key words: laser formin ; sin ly curved surface; path plannin ; process parameter 0 引言 , , [ 6] , , Kim , , , , ,