SINT粉末冶金材料.pdfVIP

MATERIALS FOR SINTERED STRUCTURAL COMPONENTS AND SELF-LUBRICATING BEARINGS The GKN Sinter Metals List of Materials provides list materials will be introduced without reference an overview of PM alloys that are commonly used or notification. This does not refer to the duty of for powder metal structural components and self- information on the current supply of parts. lubricating bearings including selected material Additional information and refences are given in properties. Other compositons can be supplied by the brochures related to special processes or GKN Sinter Metals when agreed with sales and products and in the GKN Sinter Metals General technology. Modifications and supplements to the Brochure. Remarks Referring to the Tables The tables are divided into the main sections Informative property values have been determined “Admissible Range“ and “Informative Values“. on test bars (ISO 2740) in the as-sintered state; therefore they cannot be verified on the finished Admissible ranges of density and porosity as well as component. The use of micro tensile test bars cut the range of chemical composition are given in the out of a supplied component is not allowed nor can left section. Also included are minimum hardness the tensile strenght be deducted from a hardness values that are attained even at the lowest possible measurement. density and with unfavourable chemical composi- tions within the admissible range. These hardness Many material properties are positively affected by values can be verified on the finished components. subsequent sizing or heat treatment. It is strongly