DSP实验答案Solution_lab3.pdf

Name: Section: Laboratory Exercise 3 DISCRETE-TIME SYSTEMS: TIME-DOMAIN REPRESENTATION 3.1 SIMULATION OF DISCRETE-TIME SYSTEMS Project 3.1 The Moving Average System According to Program P2_1. Answers: Q3.1 The output sequence generated by running the above program for M = 2 with x[n] = s1[n]+s2[n]as the input is shown below. The component of the input x[n] suppressed by the discrete-time system simulated by this program is -y 3.2 LINEAR TIME-INVARIANT DISCRETE-TIME SYSTEMS Project 3.5 Computation of Impulse Responses of LTI Systems According to Program P2_5. 1 Answers: Q3.20 The required modifications to Program P2_5 to generate the impulse response of the following causal LTI system: y[n] + 0.71y[n-1] – 0.46y[n-2] – 0.62y[n-3] = 0.9x[n] – 0.45x[n-1] + 0.35x[n-2] + 0.002x[n-3] are given below: clf; N = 45; num = [0.9 -0.45 0.35 0.002]; den = [1 0.71 -0.46 -0.62 ]; y = impz(num,den,N); % Plot the impulse response stem(y); xlabel(Time index n); ylabel(Amplitude); title(Impulse Response); grid; The first 45 samples of the impulse response of this discrete-time system generated by running the modified is given below: Q3.21 The MATLAB program to generate the impulse response of a causal LTI system of Q3.20 using the filtercommand is indicated below: clf; num = [0.9 -0.45 0.35 0.002]; den = [1 0.71 -0.46 -0.62 ]; x=[1 zeros(1,39)]; y = filter(num,den,x); % Plot the impulse response stem(y); 2 xlabel(Time index n); ylabe