全站仪使用说明（Full station instructions）.docVIP

全站仪使用说明（Full station instructions） Construction work instruction (1) flow chart of construction surveying and lofting process (2) the method and requirements of construction surveying and lofting operation A, description, This instruction is written according to the conventional layout method and the lofting personnel must according to the actual situation, such as the precision requirement, the control points distribution, existing instruments, site conditions, such as calculation tool to select the site measurement and lofting points The different combinations of the method and the different test methods are used. Different stages and different parts of the same project have different accuracy requirements for the lofting points The accuracy requirements of the site and the lofting point are different. Please strictly implement the engineering measurement specification and water Construction measurement specifications of electric water conservancy project and construction surveying control procedure. The limits referred to in this book refer to the specification If the design has special requirements, the design will be implemented according to the design requirements. Ii. Measurement data collection and release plan formulation 1. Obtain the data of the existing plane and elevation control of the construction area from the legal and effective way before the measurement is made. Analyze the existing control points according to the stable condition of the site control points Determine whether all or part of the control point is tested. 3. The existing control points cannot meet the requirements of precision and should be reset. The existing control point density cannot be satisfied The sample should be encrypted according to the existing control points. 4. The samples shall be measured according to the formal design drawings, documents and modification notices, and shall not be given verbal notice or without The approved drawings are released. 5. Set up measuring a