浙江省自考真题《建筑施工》08年4月（Zhejiang province, construction construction, April 2008）.docVIP

浙江省自考真题《建筑施工》08年4月（Zhejiang province, construction construction, April 2008） A miss is as good as a mile. A thousand stories have never been heard before. The man is mortal, or is heavier than mount tai, or lighter than the feather. The brothers were at the same time, smiling at each other. A tiny insect can shake a tree, but it cant get enough. This article is contributed by saraheverya Doc documents may have a poor browsing experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view. Zhejiang province high education self-study exam in April 2008 Building construction (building construction (2) test questions Course code: 02655 One, the single item choice (10 item in this topic, each item 2 points, a total of 20) individual choice Item in this big problem, in each item listed only about one out of four alternatives is meet the requirements of the subject, please fill in the code in question within parentheses. Only one of the four options listed in each question is in line with the requirements of the title. Please fill in the enclosed code. There is no separation between choice, multiple choice, or not. None of the choices. 1.打桩时若桩锤过轻，将产生如下哪种结果( ) A.桩身回弹较大，桩顶不易打坏 B.桩身回弹较大，桩顶易打坏 C.桩身回弹较小，桩顶不易打坏 D.桩身回弹较小，桩顶易打坏 2.若地面下 1～3m 存在软硬土层交接处，则沉管灌注桩的施工容易产生( ) A.断桩现象 B.缩颈桩现象 C.瓶颈桩现象 D.吊脚桩现象 3.当搭设高度 H50m 时，钢管外脚手架应推荐采用( ) A.单排落地架 B.双排落地架 C.双排双管式落地架 D.分段搭设方式 4.对于肋形楼板的拆模顺序一般是( ) A.柱模→板底模→梁侧模→梁底模 B.柱模→板底模→梁底模→梁侧模 C.柱模→梁底模→梁侧模→板底模 D.柱模→梁侧模→板底模→梁底模 5.以下各项中，适用于电渣压力焊连接的是( ) A.直径 8mm 的梁箍筋 B.直径 12mm 的楼板钢筋 C.直径 22mm 的柱筋 D.直径 25mm 的梁纵向钢筋 6.钢质锥形锚具常用于锚固( ) A.单根粗钢筋 B.多根粗钢筋 C.钢绞线束 D.钢丝束 7.旋转法吊柱起重机操作可描述为( ) A.只升钩不转臂 B.先升钩后转臂 C.边升钩边转臂 D.先转臂后升钩 8.涂膜防水施工时，每一涂层的干燥时间及整个防水层的自然养护时间应分别不少于( ) A.6 小时，3 天 B.6 小时，7 天 C.12 小时，3 天 D.12 小时，7 天 9.在时标网络图中，波形线的水平投影长度即为该工作的( ) A.工作时间 B.自由时差 C.总时差 D.最早结束时间 10.作为单位工程施工组织设计中的重要环节，决定整个工程施工全局的关键是( ) A.施工进度计划的确定 B.施工方案的选择 C.施工平面布置图的编制 D.施工进度网络计划的编制 名词解释(本大题共 小题， 二、名词解释 本大题共 5 小题，每小题 2 分，共 10 分) 11.止水法 12.台模 13.综合吊装法