电气试题（Electrical test）.docVIP

电气试题（Electrical test） 1. Selection When an electric current is flowing into the ground, the current creates a voltage drop in the soil around the site. The voltage between the two feet is called (A) around the location of the site. A: step voltage B: step by step potential C: critical voltage D: failure voltage 2. (D) the electric current can cause a fatal electric shock. A: number of Ann B: several milliampere C: hundreds of milliampere D: dozens of milliampere 3. The electric shock caused by the metal shell of the human contact device is referred to as (B) when the device has a leakage of the shell. A: direct contact with the shock B: indirect contact with electric shock C: electrostatic shock D: non-contact electric shock 4. From the Angle of preventing electric shock, insulation, screen protection and spacing are the safety measures to prevent (D). A: electromagnetic field injury B: indirect contact with electric shock C: electrostatic shock D: direct contact with electric shock To connect the electrically charged metal parts with the protection of the electrical grid in the normal condition of the electrical equipment, and refer to it as (B). A: protective earthing B: protection zero C: work grounding D: work zero 6. Protection zeros belong to (C) system. A: IT B: TT C: TN D: three-phase three-wire system Line 7, lamp voltage shall not exceed the (A) V, in particularly damp places or conductive good, on the ground, if the working place is narrow (e.g., boiler, metal container), action inconvenience, lamp voltage shall not exceed the (A) V. A: 36. 12 B: 50; 42 C: 110; 36 D: 50; 36 8. In the system that implements protection zeros, the working zero line is the middle line, usually used (); To protect a zero line is to protect a conductor, usually used (). If a line is a zero line and a zero line, use (). A: N. PEN; PE B: PE; N; PEN C: N. PE; PEN D: PEN; N; PE Answer: C The leakage protection device is mainly used in (). A: to prevent electrical accidents B: preve