磁力泵的结构特点及使用与维修（Structural characteristics and use and maintenance of magnetic pump）.docVIP

磁力泵的结构特点及使用与维修（Structural characteristics and use and maintenance of magnetic pump） Structural characteristics and use and maintenance of magnetic pump Release date: 2007-8-16 browsing: 5903 CQ magnetic drive pump, magnetic pump for short, is a magnetic actuator (magnetic coupling) to achieve no contact torque transfer to static seal instead of dynamic seal, make completely and no leakage magnetic pump centrifugal pump. 1. Structural characteristics of magnetic pump The magnetic pump consists of pump, magnetic coupling and drive motor. The left end of the pump shaft is equipped with impeller, and the right end is equipped with inner magnetic rotor, and the pump shaft is supported by sliding bearing. The bracket joins pump and motor and assures the location accuracy of the inner and outer magnetic rotor. When the motor drives the outer magnetic rotor, the magnetic field passes through the air gap and the (off) sleeve to drive the inner magnetic rotor to rotate synchronously, thus driving the impeller rotation. 1.1, selection of pump, general corrosion resistance, high strength engineering plastic, corundum ceramic, as production material such as stainless steel, with good corrosion resistance, and can be transported medium from pollution. The contact of the CQB series of magnetic pumps is made of the chemical resistant fluorocarbon alloy. Fluorinated plastic alloy is composed of super-high molecular weight polyfluoroethylene propylene and more than one other plastic, which can be packed. Such as ultra high molecular weight of ptfe and fep plastic alloy, which account for 0.1% of the weight ratio of 99.9%, which account for 99.9% of the weight ratio of 0.1%, the dry powder or dry powder wet intense grinding of blending method. Using hot pressing or cold pressing sintering and other methods to process into various products, overcome the teflon cold flow and easy deformation defect, can prolong the service life. The bearing of the magnetic pump is immersed in the conve