输送泵知识（Pump knowledge）.docVIP

输送泵知识（Pump knowledge） Large concrete conveying equipment for high buildings, high speed, overpass and other large concrete projects. Consists of the pump body and the conveying pipe. The structure is divided into piston type, extrusion type and water pressure diaphragm. The pump body is mounted on the chassis of the car, and then it is equipped with a telescopic or inflatable cloth rod. Types: divided into drag concrete pumps and car pumps. Current domestic brands: changsha lianyo, yantai yutong, sany, zhonglian, shandong zhongji, changsha branch, pump tiger heavy industry, tonga heavy industry, yantai Marine industry, etc. [1] Chinas main concrete pump can be divided into S valve and gate valve type, valve type S concrete pump belongs to a closed system, good sealing, high delivery pressure, pumping altitude but for the material of the demand is high, the gate valve type belongs to open system, feed easily, sealing is relatively low, conveying, lower conveying height low but the requirement to the material. At present, there are many manufacturers of S valve products in China, all of which are capable of doing it, all of which are sany and the two S valve systems. Due to the market, to do the manufacturer of gate valve products, ram valve pressure is small, pumping height there is no S valve, the system complex, high failure rate, so the demand of the market, less trinity, vanda and changsha linuo, only a few top of large and medium-sized manufacturers, sales market. Changsha is the emerging engineering machinery capital of our country, the innovation force is strong, the scale industry, the cluster effect is obvious, the concrete delivery pump that it produces dominates the national sales volume. The performance characteristic of [2] concrete pump is 1. The three-pump system and hydraulic circuit are not interfered with each other and the system runs. 2. It has the anti-pump function, which is conducive to the timely elimination of the blocked pipe fault and the s