齿轮油等问题（Gear oil and other problems）.docVIP

齿轮油等问题（Gear oil and other problems） Car owners often change their lubricants, including engine oil and gear oil. So many car owners save money by exchanging the engine oil and gear oil for use, which not only wastes money, but also damages their own car. Indeed, we have to tell each car owner that the irreplaceable nature of engine oil and gear oil determines that they are not interchangeable. Gear oil cannot be replaced by anti-wear hydraulic oil, guide rail oil, turbine oil (turbine oil) or ordinary mechanical oil. Because is the driving force behind the entire machine by gear transmission, the tooth surface of meshing line under load, requires extreme pressure lubricating oil and other oil contains no extreme pressure additives, not protect the tooth surface. So it can lead to point erosion, fracture and so on. Engine oil is used for engine, gear oil for crankcase. In the same way, it is not possible for some owners to choose the same viscosity but instead of a different type of gear oil or engine oil. The gear oil level is high and low, heavy load gear oil can replace the light load gear oil, instead, the ordinary gear oil is not suitable for high speed and high load equipment. Lubricants are used a lot. Wed better take seats. The engine oil is used on the engine, and the gear oil is used in the crankcase. The gear oil is specially made specially, the gear oil is the base oil of oil lubricants or synthetic lubricants mainly, the one kind of important lubricants that add extreme pressure antiabrasive and oily agent. It is used in various gear transmission devices to prevent tooth wear, abrasion, sintering, etc., prolong its service life and improve transmission power efficiency. And oil, the engine oil, is known as the blood of the automobile, which can lubricate, clean, cool, seal and reduce the engine. Engine is the heart of the car and it contains many mutual friction movement of the metal surface, these parts movement speed, poor environment, working temperat