东海矿2（The east China sea mine 2）.docVIP

东海矿2（The east China sea mine 2） To report the working materials to the dragon coal group leader Jixi branch donghai coal mine June 13, 2001 To report the working materials to the dragon coal group leader Dear chairman and leaders, First of all, I would like to extend a warm welcome to all the leaders of mine inspection and guidance. The following is a report on the current safety, production and operation of our mine. I. mine profile I mine by bor was built in 1958, over 1965 jixi mining bureau, the design capacity of 450000 tons/year, 1983, add 2 belt slope, the reconstruction and opened the five eastern mining area, the design capacity increase to 900000 tons/year. In 1997, it was expanded and expanded to open six zones. It was officially put into operation at the end of 2000. The mine design capacity is 1.2 million tons/year, and the production capacity is 1.3 million tons/year in 2006. Our mine is located in donghai town, jidong county. Main shaft geographical coordinates: longitude 131 ° 10 00 , north latitude 45 ° 21 00 . Its 31KM from jixi city. The well field is 11 kilometers, the slope is 3 kilometers, the well field area 33 square kilometers. The current resident population is more than 20,000, with 4,600 employees. There are 15 layers of coal mine and 15.97 meters of coal seam thickness. All coal seams are local. At present mainly mining coal seam is 23 #, # # # 32, 34, 34, 35 #, # and 2 # 54-48 layer, roof sandstone, local false roof is 0.2 meters to 0.2 meters thickness of sand shale and clay shale, roof management; The bottom plate is sandstone, and 34 of them are mudstone, which is difficult for mining. The hardness of coal is f = 1.3-2.3, and the coal seam Angle is 120-240. Coal seam conditions and coal quality table Coal seam Number of coal seam The thickness of the M ° inclination spacing of coal seam roof Lithologic coal structure ash content % At the top of the underlying Powder sandstone QM 240.43 The coal shale JM was single 22 0.37 The shale p