sdh维护经验（SDH maintenance experience）.docVIP

sdh维护经验（SDH maintenance experience） The common fault handling and maintenance methods of SDH system are discussed Abstract: the article briefly introduces the SDH optical transmission system operation maintenance personnel should master some basic knowledge, light equipment failure positioning principle, the common faults classification, fault location and expel the commonly used method, should maintain in the daily maintenance of the content and requirements for the proposed maintenance staff, in this paper, the above questions are carried on the simple induction and summary. Keywords: fault location; Breakdown classification; Elimination method; maintenance 0 the introduction Current optical communication in electric power carrier wave communication, microwave communication, a multiple access communication way more and more advantages, and the dominant, has now become the main transmission mode of electric power communication network. It is the carrier of light wave, the optical fiber is the transmission medium, the signal from one transmission to another communication means. It has many advantages such as large amount of information, distance, width of frequency band, high quality, anti-interference and high radiation intensity. It is a comprehensive transmission network integrating voice, image and data communication. Therefore, how to effectively maintain the daily maintenance of optical communication equipment and ensure its safe and stable operation is very important. This paper makes a brief summary and summary of the analysis process and some problems in daily maintenance of SDH optical terminal equipment in daily operation and maintenance. Master circuit, equipment and instrument condition The maintenance of SDH system is mainly the maintenance of optical circuit and equipment, and the operation and maintenance personnel must be familiar with the various aspects of the system in order to maintain the maintenance work, as follows: (1) fiber optic cables: in