年中考数学专题复习及答案 (7doc.doc

2015年中考数学专题复习及答案（27） 知能综合检测(二十五) (30分钟 50分) 一、选择题(每小题4分，共12分) 1.(2012·长沙中考)现有3 cm，4 cm，7 cm，9 cm长的四根木棒，任取其中三根组成一个三角形，那么可以组成的三角形的个数是( ) (A)1个 (B)2个 (C)3个 (D)4个 2.现有边长相同的正三角形、正方形和正六边形纸片若干张，下列拼法中不能镶嵌成一个平面图案的是( ) (A)正方形和正六边形 (B)正三角形和正方形 (C)正三角形和正六边形 (D)正三角形、正方形和正六边形 3.一个多边形截取一个角后，形成另一个多边形的内角和是1 620°，则原来多边形的边数是( ) (A)10 (B)11 (C)12 (D)以上都有可能 二、填空题(每小题4分，共12分) 4.(2012·南京中考)如图，∠1，∠2，∠3，∠4是五边形ABCDE的4个外角，若∠A=120°，则∠1+∠2+∠3+∠4=______. 5.(2011·株洲中考)按下面摆好的方式，并使用同一种图形，只通过平移方式就能进行平面镶嵌(即平面密铺)的有______(写出所有正确答案的序号). 6.(2011·南平中考)一个机器人从点O出发，每前进1米，就向右转体a°(1＜a＜180)，照这样走下去，如果他恰好能回到O点，且所走过的路程最短，则a的值等于_______. 三、解答题(共26分)[来源:学|科|网][来源:学#科#网]答案解析[来源:学科网][来源:学科网] the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into th