热熔胶机知识（Knowledge of hot glue machine）.doc

热熔胶机知识（Knowledge of hot glue machine） The main components of hot-melt adhesive, namely, basic resins, are made of ethylene and acetic acid in high pressure, and are prepared with viscosifier, viscosity regulator, antioxidant and so on. Pu polyurethane including pressure sensitive adhesive and PUR water-borne pressure sensitive adhesive glue, hot melt pressure sensitive adhesive, is a kind of pressure sensitive adhesive, mainly composed of synthetic rubber and resin and rubber oil mixture heating molten state and then coated on cotton paper, cloth or plastic film, such as base material and made a new type of adhesive tape, on the advantages of low cost is the biggest defects is affected by temperature is obvious adhesive. It is mainly used for all kinds of sealing box, sealing box, paper packaging, beverage bottle label, sealing foil, soft packing and other packaging. Ring paper stack board, etc., suitable for all kinds of materials. Sealing glue for all kinds of polishing, polishing, pressure light, PP compound such as PET, PP transparent box, adhesive film, non-woven products, cosmetics box, packaging, food packaging, cigarette packaging, furniture edge banding tetra beverage packaging, assembly, electronic industry, automobile interior trim seal, headlights, windshield assembly, etc.), non-woven pads, diapers, diapers, insoles, disposable supplies, paper coating compound trademark, label double-sided adhesive tape, glue rat board, flypaper, wooden floor and carpet glue, bandages, medical, color box packaging, carton packaging with breathable tape glue, back adhesive to stick material such as the cingulate has strong adhesive force; Good thermal stability, no impurity and operability; Excellent weatherability; Aluminum foil sealing hot melt adhesive is unique to water and waterproofing properties. Type hot melt adhesive with stable performance, high utilization rate of raw materials, production speed, high yield, device, cover an area of an area small and small inv