最新CCNA课件6OSPF.pptVIP

* Purpose: This figure presents the IGRP metric with its five possible components. Emphasize : Bandwidth and delay are the two metrics that are most commonly used. They also comprise the default metric. Note: Changing IGRP metrics can have great impact on network performance. Describe the IGRP 24-bit metric field, as follows: Bandwidth—Minimum bandwidth on the route, in kilobits per second. Delay—Route delay, in tens of microseconds. Reliability—Likelihood of successful packet transmission, expressed as an integer from 0 to 255. Loading—Effective bandwidth of path. MTU—Minimum MTU in path, expressed in bytes. The following equation calculates the metric. It is presented for instructors and is not required to be taught: metric = [k1 x bandwidth + (k2 x bandwidth) / (256 - load) + k3 x delay] If k5 does not equal 0, an additional operation is done: metric = metric x (k5/(reliability + k4)) The default constant values are k1 = k3 = 1 and k2 = k4 = k5 = 0. Again, if default values are set, metric = bandwidth + delay. The constants (k1, k2, k3) can be changed using the metric weights command. Changes to the IGRP constant values should be made with great care. * Purpose: This figure presents the IGRP metric with its five possible components. Emphasize : Bandwidth and delay are the two metrics that are most commonly used. They also comprise the default metric. Note: Changing IGRP metrics can have great impact on network performance. Describe the IGRP 24-bit metric field, as follows: Bandwidth—Minimum bandwidth on the route, in kilobits per second. Delay—Route delay, in tens of microseconds. Reliability—Likelihood of successful packet transmission, expressed as an integer from 0 to 255. Loading—Effective bandwidth of path. MTU—Minimum MTU in path, expressed in bytes. The following equation calculates the metric. It is presented for instructors and is not required to be taught: metric = [k1 x bandwidth + (k2 x bandwidth) / (256 - load) + k3 x delay] If k5 does not equal