基于相量测量的输电线路故障测距新算法.pdfVIP

第28 卷 第 17 期 电 网 技 术 Vol. 28 No. 17 2004 年9 月 Power System Technology Sep. 2004 文章编号：1000-3673 （2004 ）17-0028-05 中图分类号：TM73 ；F123.9 文献标识码：A 学科代码：470·4054 基于相量测量的输电线路故障测距新算法 李胜芳，范春菊，郁惟镛 （上海交通大学电气工程系，上海 200030 ） A NEW PHASOR MEASUREMENT BASED FAULT LOCATION ALGORITHM FOR TRANSMISSION LINES LI Sheng-fang，FAN Chun-ju ，YU Wei-yong （Dept. of Electrical Engineering，Shanghai Jiaotong University，Shanghai 200030，China ） ABSTRACT: A new phasor measurement based adaptive fault 据验证结果表明，该测距算法能适应系统运行方式的变化， location algorithm which is available to single circuit 不受故障点过渡电阻、故障类型、故障距离等因素的影响， transmission line and the double circuit transmission lines on 具有很高的测距精度。 same tower is presented. To locate the fault, in this algorithm 关键词：相量测量；线路参数；故障测距 the current and voltage phasors at the two ends of transmission line and the lumped parameter model are adopted in the on-line 1 引言 calculation of positive sequence parameters of the -type of 输电线路担负着传送电能的重要任务，其故障 equivalent circuit model of transmission line, and the 直接威胁到电力系统的安全运行。准确的故障测距 non-determinacy problem of the line parameters during the 对于加速排除线路故障和尽快恢复供电具有重要的 operation is solved. To implement the two terminals fault 意义。基于对经济效益的考虑，具有出线走廊窄、 location the mutation quantities before and after the fault are 占地少、建设速度快等优点的同杆双回线越来越多 acquired from the data sampled at both ends of the transmission line, the equivalent system impedances for singl