发泡剂粒度和发泡温度对泡沫镁合金结构的影响.PDF

上半月出版 Casting Forging Welding 金属铸锻焊技术 发泡剂粒度和发泡温度对泡沫镁合 结构的影响 周全 陈乐平 尹健 渊南昌航空大学航空制造工程学院江西省材料科学与工程研究中心袁江西南昌330063 冤 摘 要院采用熔体发泡法袁对不同发 剂粒度和发 温度下泡沫镁合金的结构进行研究遥结果表明院通过控制发 剂的粒度和发 温度袁可制备出密度尧孔隙率及气孔大小可 的 沫镁合金曰随着发 剂粒度的增加袁 沫镁合金的密 度先减小后增大袁当发 剂粒度为0.25mm 时袁泡沫镁合金的密度最小曰随着发 温度 的提高袁 沫镁合金的密度逐渐 减小曰泡沫镁合金孔隙率的变化规律与密度的变化规律相反曰随着发 剂粒度的增加或发 温度的升高袁 沫镁合金的 气孔尺寸逐渐增大遥 关键词院泡沫镁合金曰发 温度曰发 剂粒度 中图分类号院TG 146 文献标识码院 文章编号院 Effects of Particle Size of Foaming Agent and Foaming Temperature on Microstructure of Foamed Mg Alloy ZHOU Quan, CHEN Leping, YIN Jian (R es earch Center of Material Science and Engineering of Jiangxi, School of A eronautical Manuf acturing Engineering Nanchang H angkong Univ ers ity, Nanchang 330063, China) Abstract 院The effects of particle size of foaming agent and foaming temperature on structure of foamed magnesium alloy prepared by direct foaming process were studied. Experimental results show that foamed magnesium alloy with different pore size, density and porosity can be obtained by controlling particle size of foaming agent and foaming temperature. As particle size of foaming agent increases, the density of foamed magnesium decreases at first and then increases. When the particle size of foaming agent is 0.25 mm 袁the density of foamed magnesium alloy is minimum. With the increase of foaming temperature, the density of foamed magnesium alloy decreases. Variation law of