labview总结（LabVIEW总结）.docVIP

labview总结（LabVIEW总结） Chapter 1 Introduction 1, the LabVIEW program is called virtual instrument (VI). 2, LabVIEW creates a user interface (front panel) by displaying the space in the input control. An input device, such as a knob, a button, a turntable, etc.. An explicit control refers to a display device, such as a graphic, an indicator, etc.. When the front panel is created, you can add code, and use VI and structure to control objects on the front panel. Block diagram contains the code. 3, when you open an existing file or a new VI file, the startup window disappears automatically. After the file is closed, the startup window pops up automatically. You can select the View menu in the front panel to display the startup window. 4, add input controls for the front panel, which is equivalent to providing data to the program block diagram. 5, take an example: create the generated signal and display it on the front panel. CTRL+E is used to convert between the front panel and the program block window. 6, add the input control for the front panel, which provides data for the VI program block diagram. Right click on any blank space in the front panel or block diagram to display the space or function palette. 7, change the type of signal: the program block has an icon labeled as the simulation signal and, by default, the simulation is a sine wave. But you can also modify the waveform. Note: This is the input signal, that is, its amplitude, frequency, and phase are inputs. 8, the object on the program block diagram: if you want to change the amplitude of the signal through the knob, you must connect the two objects on the program block diagram. Indicates the positioning tool when the cursor is displayed as an arrow. When using the loop, place the loop part in the middle of the for loop (the gray box) 9, custom knob input control: modify the properties of the knob control. Summary: new dialog box and VI template The new dialog box contains many VI templates. The VI template