proe参数设置（Proe parameter settings）.docVIP

proe参数设置（Proe parameter settings） PROEconfig.pro common parameter + setting method With PROE, it is necessary to flexibly use the config.pro file to set up their own system parameters, interface, oil for the subsequent design work to accelerate. The config.pro file can be stored in the following two places: (1) the text directory under the Pro/E installation directory; (2) working directory of Pro/E; Select the shortcut icon of the Pro/E with the right mouse button, and the start position of the property is the working directory. When the user enters the Pro/E system, the system will be the first to read the text directory of the config.pro file, and then read the Pro/E working directory of the config.pro file options: if there is repeated set of these files, the system will last to read data based (i.e. to working directory of the config.pro file.). Therefore, the system administrator can first environment required planning out of the config.pro on the Pro/E installation directory under the text directory, and then the user will default working directory config.pro on their programming under Pro/E. In addition to the text directory under the system administrator, config.pro will also be renamed config.sup, so you can force the Pro/E users using this data set, then read the config.pro if there is a repeat of the parameters can not rewrite. When you start Pro/E, the system automatically loads the environment settings config.pro. If we set config.pro, we use some special environment parameters, such as: visible_message_line 1 Then we have to restart Pro/E, and these settings will work. The following are common config.pro parameters: ============================================================================ ============================================================================ We removed the old version of the file command: purge in the system under the input window How to set the drawing perspective [first, third] perspective Setting method: In the engineering