华硕路由器wds设置（ASUS router WDS settings）.doc

华硕路由器wds设置（ASUS router WDS settings） Answer 1:WL-500W has the support WDS function Oh!! Answer 2: because the original factory default IP, Address are , I suggest you can first WL-520GC and WL-520GU within the IP Address first change Step1. WL-520GC connects with the computer Go to the bottom left corner of the screen, start, execute and enter CMD The picture is black and white DOS screen, ARP -a MAC input query and record Address Enter to enter the Wireless Router settings page Step2. selects the right half of the screen to wireless Step A wireless, interface SSID:[sets the name by itself] Channel: [optional channel] (recommended CH1.6.11 is better) Wireless mode: [Auto] Authorization: [Shared Key] (currently only supports WEP encryption in WDS mode) WPA encryption: [options gray scale not selected] WPA key (WPA-PSK) option is not selected] gray WEP encryption: [WEP-64bits] Access code: [do not enter] WEP key 1 (10 or 26 sixteen digit) please input the password (enter a group of can) WEP key 2 (10 or 26 sixteen digit) please input the password (not input) WEP key 3 (10 or 26 sixteen digit) please input the password (not input) WEP key 4 (10 or 26 sixteen digit) please input the password (not input) Key index: [1] (see which group the key input is, select which group) Network key rotation interval: [option gray scale not selected] Save, save and restart StepB wireless and wireless convergence AP mode: [WDS only] Channel: [enter StepA selected channel] Connect to the AP in the remote join list [Yes] Remote connection list MAC address: [after entering WL-520GU MAC Address], select [Add] Save, save and restart Step3. selects the right half of the screen IP configuration IP configuration, basic functions, LAN IP settings IP address: [can be changed to 192.168.x.x] for itself (preset as ) Subnet mask: [] Save, save and restart The IP WL-520GU in Address changes first (not the same as WL-520GC IP Address) Step1. WL-520GU connects with the computer Go to the bottom left c