AC motor control circuits - ibiblio交流电动机控制电路u2014u2014ibiblio.pdfVIP

AC motor control circuits This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit /licenses/by/1.0/, or send a letter to Creative Commons, 559 Nathan Abbott Way, Stanford, California 94305, USA. The terms and conditions of this license allow for free copying, distribution, and/or modification of all licensed works by the general public. Resources and methods for learning about these subjects (list a few here, in preparation for your research): 1 Questions Question 1 An alternative to the conventional schematic diagram in AC power control systems is the ladder diagram. In this convention, the ”hot” and ”neutral” power conductors are drawn as vertical lines near the edges of the page, with all loads and switch contacts drawn between those lines like rungs on a ladder: To 480 VAC Hot Fuse Neutral 120 VAC Toggle switch Indicator light Solenoid coil Limit switch Temperature switch As you can see, the symbolism in ladder diagrams is not always the same as in electrical schematic diagrams. While some symbols are identical (the toggle switch, for instance), other symbols are not (the solenoid coil, for instance). Re-draw this ladder diagram as a schematic diagram, translating all