输电线路A comparison of methods for calculating audible noise of high voltage transmission lines.pdfVIP

4090 IEEE Transactions on Power Apparatus and Systems, Vol. PAS-101, No. 10 Octoberl982 A COMPARISON OF METHODS FOR CALCULATING AUDIBLE NOISE OF HIGH VOLTAGE TRANSMISSION LINES A report prepared by a Task Force of the Corona and Field Effects Subcommittee* Abstract - During the last several years, audible DESCRIPTION OF THE CALCULATION METHODS noise produced by high voltage transmission lines in corona has emerged as an important design considera- Audible noise calculation methods can be divided tion. In this same time frame a number of different into two general types: 1) those which are specific to methods for calculating audible noise levels have been a particular category of line design (e.g. single- proposed. The methods currently available, for both circuit, horizontal phase configuration) and, insome ac and dc lines, are described in this paper and are instances, specific to a voltage class (e.g. 550 kV); compared through application to practical line geo- 2) those which are more general in nature and which can metries for which data from long-term measurements are be applied to different designs (e.g. triangular, ver- available. tical, double circuit configurations). INTRODUCTION A complete characterization of the audible noise performance of a transmission line would include in- The audible noise produced by corona is one of the formation related to the time varying nature of the many constraints in the design of high vol