输电线路Online detecting insulator corona for diagnosing faulty insulators on transmission line.pdfVIP

2001 Annual Report Conference on Electrical Insulation and Dielectric Phenomena Online detecting insulator corona for diagnosing faulty insulators on transmission line Y. C. Cheng, Lijian Ding, C. R. Li, X. H. Ma North China Electric Power University (BEIIING), Beijing, China Abstract: This paper described some methods of differ- harmonics signals could be excluded completely when a entiating insulator corona pulses from the current pulses high frequency sensor was used. signals on the grounded line of the tower, which could However, it is not so easy to eliminate the carrier be used to identify faulty insulators on transmission signals, because there may have several carrier channels lines. The patterns of noises and the insulator corona on one line at the same time, and the center frequency of have been analyzed. A high frequency sensor with a each channel can vary with time and place. In china, the filter is used to eliminate periodic noises, such as leak- carrier frequency range is from 3kHz to lMHz with age current, harmonic and carrier. A pattern identifica- each channel having 4kHz of bandwidth. Although the tion method of distinguishing insulator corona pulse frequency band of the sensor we used is very high, this from the current pulses has been put forward, which kind of noises is so large that they can still pass through based on the pulse statistic characteristics. The field this kind of sensor and generate a tremendous output. experimental results show that these methods are effec- Figure 1 is a carrier waveform from the grounded tive and useful. line of a tower of