土工类（Geotechnical）.docVIP

土工类（Geotechnical） Determination of 1, Atterberg limits what application: (1) clear soil plasticity range (2) to distinguish the state of soil moisture content (3) estimation of soil optimum moisture content (4) in the vicinity of fine grained soil and plastic index based on classification of liquid limit 3 brief description of EDTA titration method: (1) select mixture (cement soil or lime soil), add ammonium chloride solution, stir (2), clear the suspension liquid, transfer the clarification suspension to another burner. (3) the suspension was added with sodium hydroxide (containing triethanolamine) and added with calcium red indicator. The indicator was shaken and rose red. (4) titrate the pure blue with EDTA two sodium standard solution, and record the consumption of EDTA two sodium. (5) using standard curves to determine the cement or lime dose (6); the standard curve is drawn from a sample of known cement or lime doses, using the above method to find the depletion of EDTA two sodium. 2, what is the purpose of the direct shear test? There are several indexes of soil shear strength: how can shear strength be expressed? On the sand and clay represented in the - coordinate system: direct shear test is to determine the soil shear strength index of shear strength index is two, and the internal friction angle and cohesion of C shear strength can express the purpose and significance of the direct shear test of Coulomb formula, write an expression of Coulombs law, and it was pointed out that the strength index. The purpose is to test the shear strength index of soil. It can be used to evaluate soil stability; to calculate the earth pressure on retaining structure; and to calculate the bearing capacity of soil. 2. Coulombs Law: 3. strength index c, 3, briefly describe the purpose and significance of compaction test, and explain the notice of compaction test. The best water content and the maximum dry density of the excavated soil are tested by means of a standardized tamp