钢结构清理和补漆施工措施方法.docVIP

Construction method statement for Steel Structure cleaning up and touch up 钢结构清理及补漆施工措施方法Description工作描述This method statement is prepared for cleaning up the dust、scrap iron and rust iron remained on steel structure during transport before.此方案主要是针对前期运输（海运）过程中残留在钢结构上的灰尘、铁屑、铁锈等的清理工作制定的。Manpower人员计划The following is for one group and can be adjusted by adding manpower according to actual site condition when constructing.Painter 4, mainly responsible for steel structure cleaning and painting .Watcher 1, for preventing unauthorized people from entering.以下人员为一个班组人员配置，施工时可以根据现场实际情况适当增加施工人员及施工班组。油漆工4人，主要负责钢结构清理及涂漆刷漆。现场监护1人，主要监护非施工人员禁止进入。Preparation施工准备1. To verify with each discipline if there are still constrution personnel enter into the area to be cleaned and the platform below it, to avoid working at the same time.向各个专业确认即将清理的区域及清理区域的下一层平台是否还有施工人员进入，尽量避免交叉作业。2. Material: primer and top coat for steel structure, disc, nail.材料准备：配备钢结构底漆及面漆、圆盘、尖头钉。3. Tools: scissor lifts，Φ100 grinding machine, planning wheel, blower, roller(used by painter), inside grinding machine, inside grinding head, rag, safety belt.工机具准备：剪刀式升降机、Φ100磨光机、刨光轮、压缩机、滚刷（油漆工专用）、内磨机、破布、安全带。Construction area defination and construction sequence 施工区域划分及施工顺序Principle for construction area: from up to down, from outside to inside, locally enclosed, locally cleaning. According to the actual condition and construction personnel quantity on site, steel structure in different area can be cleaned at the same time, precondition is to avoid working at the same time. Reasonable adjustment can be made to the area to be cleaned when constructing according to the actual condition on site.施工区域遵循从上至下，从边向内，局部封闭，局部清理的原则，根据现场实际情况及施工人员数量，可以同时对不同区域的钢结构进行清理，前提是尽量避免交叉作业，具体施工时可以根据现场实际情况对清理区域临时做出合理的调整。E. Construction method 施工方法 1. UsingΦ100 grinding machine to clear the debris on structure (whole structure, including flange plate and web).用Φ100磨光机对结构进行清理，清除结构上的杂物，清理时必须对结构整体进行清理（包括翼缘板及腹板）。2. After grinding, use blower to blow the d