开核（Open core）.docVIP

开核（Open core） 1-2, AND, Cool, `n`, Quiet:AMD, CPU energy saving technology, also known as cool and quiet.. Change the frequency doubling and voltage of the CPU according to the CPU load. When the CPU is free, the core voltage is reduced to a minimum, and the frequency doubling is reduced to a minimum. If the motherboard has MSIs APS capabilities, open this option. The options are set by Enabled and Disabled. 1-3, Adjust, CPU, FSB, Frequency (MHz): adjust the front bus frequency of CPU. The default frequency is the standard FSB frequency of the CPU. The user can adjust himself, that is, overclocking. Here, type the frequency values directly, such as 220. 1-4, Adjust, CPU, Ratio: adjust the frequency doubling of CPU. AMD CPU is generally locked in the highest octave, and can only reduce frequency doubling. The frequency of CPU without individual lock can be adjusted to higher frequency doubling. The default setting for this item is Auto. Hit the enter, pop up the frequency doubling list, and the user can select the desired frequency doubling. 1-5, Adjust, CPU-NB, Ratio: adjust the (memory controller) magnification in CPU. AMD CPU integrates memory controllers, which allow you to adjust the memory controllers magnification. Adjust the magnification to match the memory frequency settings, usually need to adjust many times in order to achieve the best results, if the settings are not correct, may cause blue screen crash. 1-6, EC Firmware:EC firmware settings. This is a new set of settings for the AMD SB710 chipset, used to open the AMD core (some of which are not working properly). The default setting for this is Normal. Hit enter, pop options menu for users to choose. Normal is an ordinary mode, but it does not open the closed core. Special is a special mode that opens the closed core. Notice that this option matches the following Advanced Clock Calibration settings. 1-7, Advanced, Clock, Calibration: Advanced Clock calibration. Thats what SB750 has at first. Used to ca