JUNIPER实验文档.docVIP

自建实验 目 录 实验设备： 2 实验目的： 2 实验要求： 2 实验步骤： 3 实验效果： 4 实验拓扑： 4 实验设备配置： 6 全网路由信息： 16 OSPF邻居表： 26 VRRP状态表： 28 BFD状态表： 29 隧道收发记录： 31 路由跟踪记录： 35 实验设备： JUNIPER J系列路由器5台、SSG5防火墙2台、EX4200交换机1台、哑交换机2台、PC机四台、网络线若干。 实验目的： 本实验设计之目的，熟练运用OSPF多域、被动端口、虚链路等高阶配置，以及BFD、VLAN、子接口、GRE Tunnel、防火墙策略、路由重分布、策略路由、VRRP等的灵活设置。[edit] lab@R1# show |display set set version 8.5R4.3 set system host-name R1 set system root-authentication encrypted-password $1$6AONM/WJ$d7ej0xyzqFqhTHzCvrboQ. set system login user lab uid 2001 set system login user lab class super-user set system login user lab authentication encrypted-password $1$DTAUuCIu$OdlhFIbspEeKpAezHJFS0/ set system services telnet set system services web-management http interface ge-0/0/0.0 set system services web-management http interface ge-0/0/1.0 set system services web-management http interface ge-0/0/2.0 set system services web-management http interface ge-0/0/3.0 set system syslog user * any emergency set system syslog file messages any any set system syslog file messages authorization info set system syslog file interactive-commands interactive-commands any set interfaces ge-0/0/0 unit 0 family inet address /24 set interfaces ge-0/0/1 unit 0 family inet address /24 set interfaces ge-0/0/2 unit 0 family inet address /24 set interfaces ge-0/0/3 unit 0 family inet address /24 set routing-options static route /0 next-hop set routing-options router-id set protocols ospf export direct-route set protocols ospf export static-route set protocols ospf spf-options delay 50 set protocols ospf area interface ge-0/0/3.0 interface-type p2p set protocols ospf area interface ge-0/0/3.0 hello-interval 1 set protocols ospf area interface ge-0/0/3.0 dead-interval 4 set protocols ospf area interface ge-0/0/3.0 authentication md5 1 key $9$zDva3CtuO1Rcy set protocols ospf area interface ge-0/0/3.0 bfd-liveness-detection version 1 set protocols ospf area interface ge-0/0/3.0 bfd-liveness-detection minimum-interval 200 set protocols ospf area virtual-link