本省纸业固体废弃物组成之分析.PDFVIP

Quart. J. For. Res. of Taiwan.23 (4) : 2130(2001) 1 2 75% 0.20.95 5070% 0.520.76 Analyses of Paper Industry Solid Wastes of Taiwan Shi-Yen Shen1 Feng-Jyi Chang2 Abstract In last decade, about 3/4 of the fiber used in Taiwan paper mills are recycled from wastepaper and old corrugated containers. Rejects from repulping, deinking operations and sludge from waste water treatments are the major parts of paper mills solid waste. In the manufacture of liner boards more solid waste are produced, than those of printing and writing papers, and sanitary tissues mills. Those paper industry solid wastes are commonly in neutral pH, and in high moisture content. Most repulping rejects of recycled fiber are high fiber- and plastic-containing, the bulk density varies with their constituents in a broad range between 0.2 and 0.95. Moisture contents of the sludge are in the range of 50-70%, with bulk density ranging from 0.52-0.76. In view to heating value of these solid wastes revealed that rejects and properly dried primary sludge own the possibility of incineration, but secondary sludge is fairly hard to incinerate. Analyses of metal concentration show that recycled paper mill wastes have no apparent adverse effect to the environments. Key words Paper industry, solid waste, rejects,