渐进相关（Gradual related）.docVIP

渐进相关（Gradual related） After nearly half a century of continuous improvement and improvement over the last half century, the progressive multi-focus lenses have been developed into two kinds of design trends. The main difference between these two designs is the length of the progressive channel. Rigid design of the progressive short, a gradual passage surrounding aberration is relatively small, in order to guarantee the distance vision, less demand by the vertical dimension, such as teenagers gradually belongs to this kind of design, but because of the short gradient channel, so the gradient process quickly, this kind of design relative to the elderly, more difficult to adapt to; Soft design of the progressive relatively long, a gradient passage surrounding aberration is relatively large, but because of its flexible raod, gradient process is smooth, easy to Dai Jingzhe adaptation, and become the mainstream of gradual piece of sales on the market. In recent years, with the continuous development of glasses technology, as well as the improvement of peoples living standard and quality, and gradually more focus the lens is more and more popular among the youth and middle-aged and old refractive errors customers. However, due to the restriction of optometry technology, the recognition and penetration rate of people is still very low. This paper introduces the inspection of progressive multi-focal lenses. The design principle and characteristics of progressive multi-focus lenses Progressive multi-focus lenses are designed to produce continuous and distant vision on a single lens. Fig.1 is the area of the area with the diopter and the center of the lens. Most of the asymptotic lens near the area optical center is 10-16mm in the optical center of the remote area and 2-2.5mm of the nose. On both sides of the progressive zone are aberrations, and when the line of sight is moved to the area, it will be deformed, and the degree of deformation is related to the design and the add