delll错误代码（Delll error code）.doc

delll错误代码（Delll error code） DELL server error code E1000 Failsafe, voltage, error., Contact, support. (fault protection, voltage error. Please contact support staff View system event records for serious fault events. Disconnect the AC power of the system for 10 seconds, then restart the system. If the problem persists, see "get help"". E1114 Ambient, Temp, exceeds, allowed, range. (ambient temperature is beyond the permitted range) The ambient temperature reaches a point beyond the allowable range. Please see "system cooling issues, troubleshooting."". E1116 Memory, disabled, temp, above, range., Power, cycle, AC. (disable memory, temperature out of range). Please turn off the AC power and turn on The memory has exceeded the license temperature, and the system has disabled it to prevent component damage. Disconnect the AC power of the system for 10 seconds, then restart the system. Please see "system cooling issues, troubleshooting."". If the problem persists, see "get help"". E1210 Motherboard battery failure. Check battery. (motherboard battery failure. Check the battery, please CMOS battery missing or voltage out of license range. Please refer to system battery troubleshooting". E1211 RAID, Controller, battery, failure., Check, battery. (RAID controller, battery fault). Check the battery, please The RAID battery is lost or damaged or cannot be recharged due to temperature problems. Insert the RAID battery connector again. See "installing RAID batteries" and "system cooling problems, troubleshooting."". E1216 3.3V, Regulator, failure., Reseat, PCIe, cards., 3.3V (voltage regulator failure). Please reset the PCIe card 3.3V regulator failure. Please remove and reset the PCIe expansion card. If the problem persists, see the "expansion card troubleshooting"". E1229 CPU VCORE Regulator failure. Reseat CPU. # (CPU # VCORE regulator fault. Reset CPU, please.) The VCORE regulator of a particular processor is out of order. Please reset the processor. See processor troubles