亚克力热压图像（Acrylic hot pressing image）.docVIP

亚克力热压图像（Acrylic hot pressing image） Acrylic photo, laser engraving, carved with gray, a sense of layering tips Questioner: 2009-11-27 11:55 ausbusy | Views: 850 I use Corel Draw to output, laser machine, carved out of the picture, is a very real death image, gray level sense of people without carving and three-dimensional?? is a problem for black and white? Try a lot of transformation, is like a bunch of white flour, no deep sense of hierarchy, excuse me there is no adequate guidance, I added some skills tips? Thank you very much problem..: Thank you very much for answer: bjhuazhizun answer, very fast, very sincere, I go to PS to try, if not successful, before the test, the gentleman mention, decided to try again, look okay, back,,,,, score, I will wait for other more detailed answers... Thanks again. Answer: bjhuazhizun!! I will help him. Satisfactory answer 2009-11-27 14:33, ha ha, this is inside the technical content, of course, and your equipment has some relationship A good picture with the image processing, the first software Photoshop into grayscale, reverse, adjust the contrast of laser machine for metal RF tube can be directly output, peace with printers, adjust the power and speed, can be carved; if you need to put the laser machine file, the same do the drawing in PS software, can be exported to BMP format, and then import the laser output power can be, not too much carving pictures, try a few times! How about carving a picture with a laser engraving machine and hanging it in PS? Enter the Photoshop menu bar of the file (F), open the selected processing graphics -- order bar image (I), the selected image [size] (size set) - image and then the menu bar (I) select the [mode] gray (G) display is still off color information and click it 100%, image display, image (gray) and then the menu bar (I) point selection mode of multi channel, bitmap (resolution of 380 pixels / inch) method of halftone screen, click OK to appear monotonous screen frequency 38 (lines pe