原创力文档led灯具每平方米需要多少 w 照度,照度公式（How many w illuminance and illuminance formula do LED lamps need per square meter）.doc
- 1、本文档共7页，可阅读全部内容。
- 2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
- 3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
查看更多
led灯具每平方米需要多少 w 照度,照度公式（How many w illuminance and illuminance formula do LED lamps need per square meter）
led灯具每平方米需要多少 w 照度,照度公式（How many w illuminance and illuminance formula do LED lamps need per square meter）
How many w illuminance and illuminance formula are needed per square meter?
How many w illuminance and illuminance formula are needed per square meter?
The formula is calculated by unit capacity method, n=Pn/Pn La n, which said the required number of lights (Branch), Pn said at a time all the light illuminance values and the nominal power (W), Pn, La reached 100 Lx illumination is the nominal power all lights (W). The basis of the unit capacity method is that:
In order to achieve an average illuminance of 100 Lx, the indoor ground area needs to be approximately 22W of incandescent lamp per square meter or the calculation of incandescent lamp by fluorescent lamp 5.5w.: Pn, 100=22w/m2*A (E=100, Lx, nB=0.3, n=15, Lm/w)
For the calculation of fluorescent lamps: Pn, 100=5.5w/m2*A (E=100, Lx, nB=0.3, n=15, Lm/w)
A represents the ground area (M2), that is, 10m2 ground, for example, when the illuminance is 100 LX, consider installing 40W fluorescent lamp. How many units should be installed?
Pn, 100=5.5w/m2*1m2=55w n=55w/40w=1.375 = 2
If you take the indoor illumination is 300 LX, the number of lights so the need for Pn, 300= (E/100 LX) *Pn, 100= (300/100) *55=165w n=165/40=4.125 = 5
You cant figure out how many W per square meter you need according to this algorithm?
The factory illumination requirement is 250-300 Lx
Banquet place illumination requirement is 300-700 Lx,
Restaurant illumination requirement is 150-300 Lx
Restaurant, illuminance requirements of 200 Lx, 5 meters high, 45 watts of energy-saving lamps, 1000 square meters to 80.
2600 square meters, about 210.
How many watts of energy saving lamps (bulbs) are available in 2. square meters?
The general standard is: 15 - 18 square meters of lighting lights in 60 - 80 watts; 30 - 40 square meters in 100 to 150 watts; 40 - 50 square meters in 220 to 280 watts; 60 - 70 square meters in 300 to 350 watts; 75 - 80 squ
文档评论（0）