汽车驾驶标准（Driving standards）.docVIP

汽车驾驶标准（Driving standards） Driving standards (general part) I. inspection before starting: Check before power on: 1, check the tank cooling water (winter antifreeze) to the water inlet; 2. Check the oil in the range of the ruler; 3, check the front and rear wheel fastening bolts are not loose; 4, check the drive shaft, front and rear connecting bolts are not loose; 5, check the tire pressure (empty car state, there are four rounds of flowers to the ground); 6, check the steering gear screw is not loose; (two) check after power on: 1. Switch on the power switch, insert the start key and turn to