标准表法液体流量标准装置（Standard meter liquid flow standard device）（Standard meter liquid flow Standard device）.docVIP

标准表法液体流量标准装置（Standard meter liquid flow standard device）（Standard meter liquid flow Standard device） Standard meter liquid flow standard device The standard meter method is composed of liquid source, test pipeline, standard liquid flowmeter, timer and control equipment. The standard meter method is the same as the static volumetric liquid flow standard device for piping design, control system and voltage stabilizer. Standard liquid meter can provide standard flow according to the check flow point, or the standard flow can be given according to the check flow range. The standard liquid meter can be connected with the test pipeline, and can be connected in parallel with the test pipeline. Standard liquid flowmeter can be all kinds of liquid flow meter, this chapter mainly introduces the liquid flow meter is an electromagnetic flowmeter standard table method water flow standard device (in this chapter are referred to as standard table method water flow standard device). The structure of the standard surface water flow standard device in the first section Standard table method, the typical structure as shown in figure 8-1 water flow standard device, the water pump, buffer tank, on-off valves, piping, electromagnetic flowmeter, test line (including the switch valve, regulating valve, detected flowmeter and its section, etc.), the timer and control system, etc. The working principle of electromagnetic flowmeter is that the induced electromotive force generated by the conduction fluid in the magnetic field is proportional to the flow. The electromagnetic flowmeter has no mechanical parts, so the range of the range is wide, without mechanical inertia, and the reaction is sensitive. When the fluid is passed, it does not produce pressure loss, and it will not cause wear and blockage. Therefore, the standard meter is the typical device of standard meter water flow standard device. Figure 8-1 is the standard meter water flow standard device which is connected with the test pipe