锥螺纹钢筋接头工艺标准)（Technical standard of taper thread rebar connection）.docVIP

锥螺纹钢筋接头工艺标准)（Technical standard of taper thread rebar connection） Technical standards for taper thread rebar joints (417-1996) The scope of The technology standard is applicable to industrial and civil building cast-in-place reinforced concrete structure in hot rolling Ⅱ 16 ~ 40 mm in diameter, Ⅲ level at the same level of the same diameter or different diameter steel bar connection. The diameter of the steel bar is not more than 9mm. The taper screw steel joint shall be approved by the designer. Construction preparation 2.1 materials and main equipment: 2.1.1 reinforcement: the level and diam