轻型树脂传递模塑工艺(l-rtm)（Light resin transfer molding process (l-rtm)）.docVIP

轻型树脂传递模塑工艺(l-rtm)（Light resin transfer molding process (l-rtm)） Lightweight resin transfer molding process (l-rtm) - a rapidly developing low-cost manufacturing technology 1. Introduction of l-rtm technology Traditional RTM process, because it is closing process, has a less volatile organic compounds (VOC) emissions (below of SPPm), expand the scope of available raw materials, lower labor and environmental friendly as well as the advantages of both sides can get bright and clean products. But in the RTM process, resin injection is under high pressure and velocity, so we want to make the mould