运输系统轨道的标准（The standard of rail transit）.docVIP

运输系统轨道的标准（The standard of rail transit） The track shall have a circuit inspection system, post responsibility system, accident record, maintenance record and technical resume. All records should be kept in a timely, clear and accurate manner. I. quality standard (a) narrow track railway line Serial number check item quality standard and allowable deviation remark Main transport lines general transportation lines The center line of the mm 1 orbital Monorail centerline comply with the design, the deviation is not more than design value plus or minus 50, center line of the double spacing not less than the design requirements, no more than 20 design values, the center of the dual-track and design position deviation is not more than 50 handover standard: inspection, for choosing hang line with the center line of the roadway design check, inoue center column shall prevail 2 grade with the actual elevation and the elevation of mm rail design elevation of the deviation of plus or minus 50, slope error within 50 meters of less than 1/1000 of the elevation difference within 50 meters of not more than 50 (including slope mine winch) over standard: underground measuring waist line to the rail surface offset, inoue in level measurement 3 The wrong difference between the surface and the inside of the joint is not greater than 2 and should not be hard bent 4 direction mm straight and straight, with 10 strings of adjacent no more than 10; The curve is visually rounded, with two strings adjacent to the positive vector: no more than 2 when the radius is 50 meters, and no more than 3 straight lines when the radius is 50 meters or less, and the number of 10 meters is not more than 12. The curves are visually circular, and the adjacent positive vector is not more than 3 with 2 string quantity. Take the positive vector of the curve of the inside of the outer rail with two meters long string. 5. The high and low mm visual level before the 5 rail, with 10 strings of no more than 10; Tilt w