变压器套管在线监测方法探讨 Discussion on Method of Online Monitoring of Transformer Bushing.pdfVIP

变压器套管在线监测方法探讨 电工电气 (20 3 No.6) 现状与展望 变压器套管在线监测方法探讨 1,2 3 3 陈石桢 ，施广宇 ，张孔林 (1 福建省电力有限公司 技术中心，福建 福州 350007； 2 福州大学 电气工程与自动化学院，福建 福州 350108； 3 福建省电力有限公司 电力科学研究院，福建 福州 350007) 摘 要：介绍了几种容性设备的在线监测方法，分析了它们的优缺点。在介损测量现场应用中，存在 电网谐波、频率波动、相间干扰、电磁干扰等因素，同时非同步采样、非整周期采样会对测试结果产生影响。 为了提高测量精确度，要在算法改进、硬件改进、测量方法上作进一步的研究。只有通过软件算法与硬 件相互配合，才能提高测量的精确度。 关键词：变压器套管；在线监测；介质损耗；容性设备 中图分类号：TM216 文献标识码：A 文章编号：1007-3175(2013)06-0001-06 Discussion on Method of Online Monitoring of Transformer Bushing 1, 2 3 3 CHEN Shi-zhen , SHI Guang-yu , ZHANG Kong-lin  Technical Center of Fujian Electric Power Co., Ltd, Fuzhou 350007, China; （ 2 College of Electrical Engineering and Automation, Fuzhou University, Fuzhou 35008, China; 3 Electric Power Research Institute of Fujian Electric Power Co., Ltd, Fuzhou 350007, China ） Abstract: Introduction was made to several online monitoring methods of capacitive equipment and analysis was made to their advantages and disadvantages. In field application of dielectric loss measurement, there existed harmonic influence, frequency fluctuating, inter-phase interfer- ence, electromagnetic interference and other interference factors, meanwhile asynchronous sampling and non-integer period sampling would influ- ence the test result. To improve the measurement accuracy, further research should be done on algorithm improvement, hardware improvement and measuring methods study. Only if the software algorithm corresponds to the hardware, the measurement precision