紧固件性能等级（Fastener performance rating）.docVIP

紧固件性能等级（Fastener performance rating） Steel structure connecting bolts 3.6, 4.6, performance grade 4.8, 5.6, 6.8, 8.8, 9.8, 10.9, 12.9 and more than 10 levels, of which 8.8 or more bolt material for low carbon alloy steel or carbon steel by heat treatment (quenching and tempering), known as the high strength bolts, known as the rest ordinary bolt. The performance of two grade bolt part numbers, respectively, nominal tensile strength of bolt material value and yield ratio. For example: Bolt performance level 4.6, its meaning is: 1, bolt material nominal tensile strength reached 400MPa; 2, bolt material yield strength ratio is 0.6; 3, the nominal bolt material yield strength of 400 * 0.6=240MPa The performance of grade 10.9 high strength bolts, the materials after heat treatment, can achieve: 1, bolt material nominal tensile strength reached 1000MPa; 2, bolt material yield strength ratio is 0.9; 3, the nominal bolt material yield strength of 1000 * 0.9=900MPa Bolt performance level of meaning is the international standard, the same level of performance of the bolt, regardless of the material and the origin of the difference, the performance is the same, only the level of performance can be designed. The strength grade of the so-called 8.8 level and 10.9 level refers to the bolt shear stress level is 8.8GPa and 10.9GPa 8.8 nominal tensile strength 800N/MM2 nominal yield strength of 640N/MM2 The bolt is indicated by X.Y strength, the tensile strength of the bolts X*100=, X*100* (Y/10) = yield strength of this bolt (because according to the labeling regulations: yield strength / tensile strength of =Y/10) Such as 4.8 Is this bolt tensile strength is 400MPa; the yield strength is 400*8/10=320MPa. The other: stainless steel bolts usually marked as A4-70, A2-70, and explain the significance There are two main measures: one of the worlds length measuring unit, a metric unit of measure for the meter (m), cm (CM), mm (mm), is widely used in Europe, China and Japan in Southeast